E.G Ring Shank 2 1/4”x.099” Wire Pallet Coil Nails Clavos Nail

Category：

Nails

Keywords：

Tel：

Tel：

Tel：

E-mail：

Description

Coil nails are a revolutionary product in the wood industry.

This kind of collated Nails are used in siding, sheathing, fencing, sub floor, roof decking exterior deck and trim and some other wood working.The traditional method of using nails manually involves a lot of manual labor which are reduced substantially using the coil nails with pneumatic guns.The use of coil nails with pneumatic gun increases the productivity 6-8 folds thus reducing the labor cost substantially.

The anti-rust rust coating increases the life of the nails thereby improving the quality of finished goods

Shank Type

The main types of coil nails include smooth shank coil nails, ring shank coil nails, and screw shank coil nails.

Screw Shank

A screw shank nail is generally used in hard woods to prevent the wood from splitting while the fastener is being driven. The fastener spins while being driven (like a screw) which creates a tight groove that makes the fastener less likely to back out.

Surface Treatment

Painting coated coil nails are coated with a layer of paint to help protect the steel from corroding. Although painted fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion.

Customer Usage Display

The coil nail is composed of a number of single nails arranged in the same shape and equidistance and the connecting piece, the connecting piece can be copper plated iron wire, the connecting piece is connected with the nails in the β Angle direction with the center line of each nail rod, and the nails are connected together, and then rolled into a roll.

Shank Type	1.Smooth
	2.Screw
	3.Ring
	4.Twisted
Head Style	Flat
Finish	YELLOW, BLUE, RED, BRIGHT, E.G, H.D.G
Shank Diameter	2.1mm--4.3mm(0.083''--0.169'')
Length	25mm--150mm(1''--6'')
Coil angle	14-16 degree
Point angle	40-67 degree diamond
Usage	Building Construction